How much does it cost to fix P0750?

Typical repair cost is $100–$500.

P0750 — Shift Solenoid A Malfunction

High Severity · Transmission

OBD-II code P0750 means your vehicle's ECU detected: Shift Solenoid A Malfunction. Below: causes, step-by-step fixes, and repair cost — free, no signup needed.

High severity — do not ignore. Get a diagnosis promptly to avoid further engine damage.

Typical Repair Cost

$100–$500

Parts + labor, national average

Severity

High

Address as soon as possible

🔍

Common Causes of P0750

Failed shift solenoid A
Wiring
Low ATF

🔧

How to Fix Code P0750

Check ATF level

Test shift solenoid A

Replace solenoid ($50–$300)

❓

FAQ — Code P0750

What does OBD-II code P0750 mean?

P0750 means your vehicle's onboard computer detected: Shift Solenoid A Malfunction. This is a high-severity code in the Transmission category.

How much does it cost to fix code P0750?

Typical repair cost for P0750 is $100–$500 including parts and labor. Costs vary by vehicle make, model, and location. A free scan at AutoZone or O'Reilly is a good first step.

Can I drive my car with code P0750?

Code P0750 is high severity. Avoid long drives until diagnosed — continued driving can cause additional engine damage.

What are the most common causes of P0750?

The most common causes are: Failed shift solenoid A, Wiring, Low ATF. Always start with the cheapest diagnosis step before replacing parts.

Will code P0750 clear itself?

Code P0750 will clear itself after the underlying issue is fixed and the ECU completes several successful drive cycles. Clearing it without fixing the root cause only masks the problem temporarily.

Is P0750 showing on your car?

Enter your VIN for a free vehicle-specific report — recalls, specs, and market value. No signup required.

🔗

Related Transmission Codes

P0700Transmission Control System Malfunction P0705Transmission Range Sensor Circuit Malfunction...P0711Transmission Fluid Temperature Sensor Range/Performance P0715Turbine/Input Shaft Speed Sensor Circuit P0720Output Speed Sensor Circuit Malfunction P0730Incorrect Gear Ratio

OBD-II code data is based on SAE J2012 standards and general repair industry data. Repair costs are national averages and vary by vehicle, location, and shop. Always consult a qualified mechanic for a diagnosis specific to your vehicle.