Home ← Back
HomeOBD-II Codes › P0130

P0130 — O2 Sensor Circuit Malfunction — Bank 1, Sensor 1

Medium Severity  ·  Sensors

OBD-II code P0130 means your vehicle's ECU detected: O2 Sensor Circuit Malfunction — Bank 1, Sensor 1. Below: causes, step-by-step fixes, and repair cost — free, no signup needed.

Drivable short-term but schedule a diagnosis soon. Prolonged driving can worsen the issue.
Typical Repair Cost
$100–$400
Parts + labor, national average
Severity
Medium
Schedule repair soon
🔍

Common Causes of P0130

  • Failed O2 sensor
  • Wiring damage
  • Exhaust leak near sensor
🔧

How to Fix Code P0130

1
Check wiring connector
2
Inspect for exhaust leaks
3
Replace upstream O2 sensor ($80–$250)

FAQ — Code P0130

What does OBD-II code P0130 mean?
P0130 means your vehicle's onboard computer detected: O2 Sensor Circuit Malfunction — Bank 1, Sensor 1. This is a medium-severity code in the Sensors category.
How much does it cost to fix code P0130?
Typical repair cost for P0130 is $100–$400 including parts and labor. Costs vary by vehicle make, model, and location. A free scan at AutoZone or O'Reilly is a good first step.
Can I drive my car with code P0130?
Code P0130 is generally safe for short trips, but have it diagnosed soon to prevent the problem from worsening.
What are the most common causes of P0130?
The most common causes are: Failed O2 sensor, Wiring damage, Exhaust leak near sensor. Always start with the cheapest diagnosis step before replacing parts.
Will code P0130 clear itself?
Code P0130 will clear itself after the underlying issue is fixed and the ECU completes several successful drive cycles. Clearing it without fixing the root cause only masks the problem temporarily.

Is P0130 showing on your car?

Enter your VIN for a free vehicle-specific report — recalls, specs, and market value. No signup required.

🔗

Related Sensors Codes

📋

Browse All OBD-II Codes

OBD-II code data is based on SAE J2012 standards and general repair industry data. Repair costs are national averages and vary by vehicle, location, and shop. Always consult a qualified mechanic for a diagnosis specific to your vehicle.