How much does it cost to fix P0711?

Typical repair cost is $100–$350.

P0711 — Transmission Fluid Temperature Sensor Range/Performance

Medium Severity · Transmission

OBD-II code P0711 means your vehicle's ECU detected: Transmission Fluid Temperature Sensor Range/Performance. Below: causes, step-by-step fixes, and repair cost — free, no signup needed.

Drivable short-term but schedule a diagnosis soon. Prolonged driving can worsen the issue.

Typical Repair Cost

$100–$350

Parts + labor, national average

Severity

Medium

Schedule repair soon

🔍

Common Causes of P0711

Failed TFT sensor
Low ATF
Wiring

🔧

How to Fix Code P0711

Check ATF level

Test TFT sensor

Replace if failed

❓

FAQ — Code P0711

What does OBD-II code P0711 mean?

P0711 means your vehicle's onboard computer detected: Transmission Fluid Temperature Sensor Range/Performance. This is a medium-severity code in the Transmission category.

How much does it cost to fix code P0711?

Typical repair cost for P0711 is $100–$350 including parts and labor. Costs vary by vehicle make, model, and location. A free scan at AutoZone or O'Reilly is a good first step.

Can I drive my car with code P0711?

Code P0711 is generally safe for short trips, but have it diagnosed soon to prevent the problem from worsening.

What are the most common causes of P0711?

The most common causes are: Failed TFT sensor, Low ATF, Wiring. Always start with the cheapest diagnosis step before replacing parts.

Will code P0711 clear itself?

Code P0711 will clear itself after the underlying issue is fixed and the ECU completes several successful drive cycles. Clearing it without fixing the root cause only masks the problem temporarily.

Is P0711 showing on your car?

Enter your VIN for a free vehicle-specific report — recalls, specs, and market value. No signup required.

🔗

Related Transmission Codes

P0700Transmission Control System Malfunction P0705Transmission Range Sensor Circuit Malfunction...P0715Turbine/Input Shaft Speed Sensor Circuit P0720Output Speed Sensor Circuit Malfunction P0730Incorrect Gear Ratio P0740Torque Converter Clutch Circuit Malfunction

OBD-II code data is based on SAE J2012 standards and general repair industry data. Repair costs are national averages and vary by vehicle, location, and shop. Always consult a qualified mechanic for a diagnosis specific to your vehicle.