Home ← Back
HomeOBD-II Codes › P0308

P0308 — Cylinder 8 Misfire

High Severity  ·  Engine

OBD-II code P0308 means your vehicle's ECU detected: Cylinder 8 Misfire. Below: causes, step-by-step fixes, and repair cost — free, no signup needed.

High severity — do not ignore. Get a diagnosis promptly to avoid further engine damage.
Typical Repair Cost
$100–$1,000
Parts + labor, national average
Severity
High
Address as soon as possible
🔍

Common Causes of P0308

  • Spark plug
  • Coil pack
  • Injector
  • Compression
🔧

How to Fix Code P0308

1
Replace spark plug #8
2
Swap coil
3
Test injector
4
Compression test

FAQ — Code P0308

What does OBD-II code P0308 mean?
P0308 means your vehicle's onboard computer detected: Cylinder 8 Misfire. This is a high-severity code in the Engine category.
How much does it cost to fix code P0308?
Typical repair cost for P0308 is $100–$1,000 including parts and labor. Costs vary by vehicle make, model, and location. A free scan at AutoZone or O'Reilly is a good first step.
Can I drive my car with code P0308?
Code P0308 is high severity. Avoid long drives until diagnosed — continued driving can cause additional engine damage.
What are the most common causes of P0308?
The most common causes are: Spark plug, Coil pack, Injector, Compression. Always start with the cheapest diagnosis step before replacing parts.
Will code P0308 clear itself?
Code P0308 will clear itself after the underlying issue is fixed and the ECU completes several successful drive cycles. Clearing it without fixing the root cause only masks the problem temporarily.

Is P0308 showing on your car?

Enter your VIN for a free vehicle-specific report — recalls, specs, and market value. No signup required.

🔗

Related Engine Codes

📋

Browse All OBD-II Codes

OBD-II code data is based on SAE J2012 standards and general repair industry data. Repair costs are national averages and vary by vehicle, location, and shop. Always consult a qualified mechanic for a diagnosis specific to your vehicle.