How much does it cost to fix P0715?

Typical repair cost is $100–$400.

P0715 — Turbine/Input Shaft Speed Sensor Circuit

High Severity · Transmission

OBD-II code P0715 means your vehicle's ECU detected: Turbine/Input Shaft Speed Sensor Circuit. Below: causes, step-by-step fixes, and repair cost — free, no signup needed.

High severity — do not ignore. Get a diagnosis promptly to avoid further engine damage.

Typical Repair Cost

$100–$400

Parts + labor, national average

Severity

High

Address as soon as possible

🔍

Common Causes of P0715

Failed input speed sensor
Wiring damage
Metal debris on sensor magnet

🔧

How to Fix Code P0715

Replace input shaft speed sensor ($80–$250)

Clean metal shavings from sensor magnet

Check wiring connector

❓

FAQ — Code P0715

What does OBD-II code P0715 mean?

P0715 means your vehicle's onboard computer detected: Turbine/Input Shaft Speed Sensor Circuit. This is a high-severity code in the Transmission category.

How much does it cost to fix code P0715?

Typical repair cost for P0715 is $100–$400 including parts and labor. Costs vary by vehicle make, model, and location. A free scan at AutoZone or O'Reilly is a good first step.

Can I drive my car with code P0715?

Code P0715 is high severity. Avoid long drives until diagnosed — continued driving can cause additional engine damage.

What are the most common causes of P0715?

The most common causes are: Failed input speed sensor, Wiring damage, Metal debris on sensor magnet. Always start with the cheapest diagnosis step before replacing parts.

Will code P0715 clear itself?

Code P0715 will clear itself after the underlying issue is fixed and the ECU completes several successful drive cycles. Clearing it without fixing the root cause only masks the problem temporarily.

Is P0715 showing on your car?

Enter your VIN for a free vehicle-specific report — recalls, specs, and market value. No signup required.

🔗

Related Transmission Codes

P0700Transmission Control System Malfunction P0705Transmission Range Sensor Circuit Malfunction...P0711Transmission Fluid Temperature Sensor Range/Performance P0720Output Speed Sensor Circuit Malfunction P0730Incorrect Gear Ratio P0740Torque Converter Clutch Circuit Malfunction

OBD-II code data is based on SAE J2012 standards and general repair industry data. Repair costs are national averages and vary by vehicle, location, and shop. Always consult a qualified mechanic for a diagnosis specific to your vehicle.